Device Driver: RSLinx
Integrator ONLY
Message Configuration
| Name | Description |
|---|---|
| Name | Any name to describe the PLC. |
| ID | Unique ID that must match the DeviceID of the message headers going or coming from to this PLC. |
| NetworkByteOrder | (optional, zero by default) - 0 or 1. 0 is little endian. |
| RSLinxDriverName | Name as defined in the driver configuration in RSLinx. |
| RSLinxStation | Station Number as defined in the driver configuration in RSLinx. |
| RSLinxPath | Path to the processor slot. (eg. 1.0) |
| RequestType | For each message used with this PLC: ID matching the message ID in Sym3. |
| ResquestSymbol | For each message used with this PLC: Symbol defined in RSLinx identify the memory address where the message is copied to or read from. |
| autoconnect | (optional true if not specified). If false, Sym3 won’t connect to this device until an explicit call to ConnectDevice() is made from the script. |
Example:
The following is an example of the configuration for an RSLinx’ PLC type:
Name=PLC1
ID=11
NetworkByteOrder=0
RSLinxDriverName=AB_ETH-1
RSLinxIPAddress=192.168.59.75
RSLinxStation=1
RSLinxPath=1.0
RequestType1=101
ResponseSymbol1=$N101:0,14,RAW,MODIFY
RequestType2=102
ResponseSymbol2=$N102:0,23,RAW,MODIFY